After using it for several years or a long period of time, the gaps between various parts increase, the accessories wear out, and oil leakage often occurs. How to eliminate this phenomenon? The following methods teach you how to avoid oil leakage in diesel generator sets.
1. Glue repair method for leakage control. Small leaks caused by cracks, sand holes, air holes, etc. in fuel tanks, water tanks, oil pipes, and water pipes can be repaired by applying adhesive to clean damaged areas.
2. Padding and leak control method. The oil pipe joint anti leakage gasket in the diesel generator set leaks oil. A thin plastic pad with double-sided lubrication can be added at both ends of the anti leakage gasket, and it can be tightened firmly to prevent leakage.
3. Use the method of extracting and treating leaks. When multiple paper pads such as the oil tank bottom shell, cylinder head, gear compartment cover, and oil pan back cover of a diesel generator set leak, if the paper pads are intact and the joint surface is clean, a layer of butter can be applied on both sides of the paper pads, and the bolts can be tightened to prevent leakage; If replacing with a new paper pad, soak the new paper pad in diesel for 10 minutes, then take it out and wipe it clean. Apply a layer of butter to the joint surface before installing it.
4. Lacquer film liquid leak control method. If there is leakage at the joints of the diesel generator fuel tank, water tank, oil pan, etc., the paint film can be soaked in alcohol and the paint film liquid can be applied to the clean joints.
5. Anaerobic adhesive leak control method. When there is leakage at the ventilation bolts, double headed bolts, etc. on the diesel generator, anaerobic adhesive can be applied to the clean bolt threads or screw holes, which can quickly solidify the structural film and fill the gaps in the parts; This method is more effective in treating leaks in the threads of high-pressure oil pipe joints in diesel generators.
6. Liquid sealant leak control method. When interface leakage and destructive leakage occur due to the drawbacks of solid gaskets on diesel generators, liquid sealant is applied to the clean solid gasket joint surface. After solidification, the structure is uniform, stable, and continuously adhered with a peelable film gasket, which can prevent leakage.
7. Scale rehabilitation glue leakage treatment method. When there is leakage in the shaft and sleeve, bearings and bearing seats, valves and valve rings, self tightening oil seals, fillers, etc. of diesel generators, scale rehabilitation adhesive can be applied to the damaged parts of clean collaborative parts. After solidification, a wear-resistant and mechanically strong thin film layer can be constructed, and then the geometric shape and collaborative accuracy of the machined rehabilitation parts can be eliminated to eliminate leakage.
Guangzhou Saiwei Energy Technology Co., Ltd. is a comprehensive enterprise specializing in design, production, and generator installation. Guangzhou Saiwei has many years of experience in engineering design and installation services. For many years, Guangzhou Saiwei has been committed to providing every customer with comprehensive products and energy solutions, including technical consulting, whole machine and generator supply, operation training, etc., with leading technology and first-class quality. The product range covers land diesel generator sets, marine generator sets, high-voltage generator sets, etc., and is widely used in industries such as power, communication, iron towers, healthcare, financial systems, data centers, etc. Welcome to inquire: 13302262088