欧美一级精品一级久久久久久,日韩一区二区三区免费视频,无码强姦精品一区二区,色一情一乱一伦一区二区三区日本

Language
News
News

With years of experience in designing and assembling complete sets of generator sets

The working principle and precautions of the oil transfer pump for diesel generator sets

Time:2023-10-08

The function of the fuel transfer pump is to ensure that diesel circulates in the low-pressure oil circuit and can supply a sufficient amount and a certain pressure of fuel to the pump. Its fuel delivery volume should be 3-4 times the maximum fuel injection volume at full load. Therefore, before starting the diesel generator set, use the hand pump on the oil pump to exhaust the air in the oil circuit, so that it can smoothly suck up the fuel within 1 meter below the oil pump base within 0.5 minutes. After the air in the pump oil is discharged, tighten the handle nut. After long-term use, the parts of the oil pump should also be inspected. So, what are the precautions to pay attention to when inspecting?

If there is wear, depression, or pitting on the surface of the one-way valve, use grinding paste to grind it on the flat plate. If it is severe, it should be replaced with a new one.

When the surface of the one-way valve seat on the housing is severely worn or uneven, it should be replaced.

3. If the wear of the top rod and the top rod sleeve is severe, resulting in an increase in gap, poor sealing, and severe diesel leakage, it is necessary to replace it with the housing or choose to equip it with a larger scale top rod, but it needs to be studied through mutual research.

4. The coarse filter core inside the oil inlet pipe joint, as well as the simple cotton like debris blocking it, affects fuel supply. Therefore, it is important to pay attention to cleaning the fuel and removing dirt from the filter core frequently.

When the rubber ring of the hand oil pump piston is damaged, it should be replaced in a timely manner. After the assembly of the center of gravity of the oil pump, it is requested that the piston and push rod of the oil pump should move outstandingly throughout the entire stroke, and there should be no obstruction or jamming. The pressure handle oil pump should be lightweight and sensitive. When installing the one-way valve spring, it is important to note that the one-way valve spring needs to be accurately embedded in the spring groove.

It can be seen from this that the inspection of the oil transfer pump of diesel generator sets is very important. When using diesel generator sets, the inspection and protection of the oil transfer pump are often ignored. Originally, the oil transfer pump is a major component of the generator. In order to ensure the long-term use of the generator, it is necessary to inspect and protect it frequently. The parts of the oil transfer pump also need to be carefully inspected in order to extend the service life of the diesel generator set.

Guangzhou Saiwei Energy Technology Co., Ltd. is a comprehensive enterprise specializing in design, production, and generator installation. Guangzhou Saiwei has many years of experience in engineering design and installation services. For many years, Guangzhou Saiwei has been committed to providing every customer with comprehensive products and energy solutions, including technical consulting, whole machine and generator supply, operation training, etc., with leading technology and first-class quality. The product range covers land diesel generator sets, marine generator sets, high-voltage generator sets, etc., and is widely used in industries such as power, communication, iron towers, healthcare, financial systems, data centers, etc. Welcome to inquire: 13302262088


昭平县| 探索| 苏州市| 中宁县| 九江县| 延安市| 苏尼特左旗| 徐水县| 德阳市| 河曲县| 偃师市| 临沭县| 台北市| 瑞金市| 汉寿县| 旬邑县| 肃宁县| 呼玛县| 长葛市| 武宣县| 富民县| 湘西| 伊金霍洛旗| 邹平县| 鄂州市| 新化县| 彭州市| 浪卡子县| 喀什市| 陇西县| 油尖旺区| 穆棱市| 鄂尔多斯市| 江阴市| 突泉县| 丹凤县| 岳池县| 通山县| 饶河县| 台北市| 河池市|